Hunter 28699 Owner's Manual - Page 14

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Uninstalling the Light Fixture 7-12. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the red wire. 7-13. Disconnect the plug connectors between the two white wires. 7-14. Remove the two screws attaching the light kit to the lower switch housing. 7-15. Remove the light fixture from the lower switch housing, pulling disconnected wires through the hole in the center of the lower switch housing. Note: When removing the wires, pull the thin plug connector (male) through first, and then pull the other plug connector (female) through the hole. 7-16. Install the dummy terminals (included in the sack parts) on the two disconnected wires in the lower switch housing. 7-17. Install the switch housing cap and plug button to the lower switch housing. 7-18. Once you have uninstalled the light fixture, continue with step 7‑1. Lower Switch Housing Step 7-14 Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-17 14 42444-01 • 11/01/10 • Hunter Fan Company