Hunter 30756 Owner's Manual - Page 15

Troubleshooting Problem 1. No display or operation. 2. Keypad does not work. Solutions • Confirm that the unit is plugged in. • Check the installation of the front grill. • Reset the air purifier. (See Resetting the Air Purifier on pg. 10.) • Key pad has been locked to prevent accidental changes to the programs. (See Keypad Lock on pg. 9 to unlock the key pad.) 3. Erratic Display or Operation. • Reset the air purifier. (See Resetting the Air Purifier on pg. 10.) 4. Filter and/or Pre-filter Indicator is Flashing. 5. Cleanable Filter and/or Carbon Pre-Filter Life Counter is flashing 0%. 6. Unit has reduced air flow or increased noise. 7. Remote is not working properly. • The Filter and/or Pre-Filter Life Counters have reached the estimated usage times. Check and replace or clean filters if needed. (Refer to Filter and Pre-Filter Counters on pg. 9.) • The Filter and/or Pre-Filter Life Counters have greatly exceeded the estimated usage times. Replace or clean the corresponding filters. • The filter is clogged and should be cleaned. (Refer to Cleaning the Filter on pg. 12.) • Be sure that the remote is facing the air purifier when pressing the key. • Check the batteries. (Refer to Remote Operation on page 8.) Technical Support If you have any additional questions or problems with your Hunter air purifier, please call 1-888-830-1326 from 8:00 am to 5:00 pm Central Time or contact us over the Internet at www.hunterfan.com. 15 41558-01