Hunter 42999 Owner's Manual - Page 16
Programming - review
View all Hunter 42999 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Programming 16-17 Start-Up When you first install two AA size batteries, as directed in the installation instructions, press the Reset Button. s The thermostat is preset at the factory to 68°F (20°C) for heat and 78°F (25°C) for cool. s Room temperature is displayed. s Your thermostat batteries will prevent memory loss and avoid reprogramming. Replace batteries as soon as low battery indicator comes on the display. s A built-in timer prevents damage to your air conditioner compressor, caused by rapid cycling, by providing a delay of 4 minutes before it will restart. s The thermostat will display room temperature from 32°F to 99°F. (0°C to 37°C). s The temperature can be set from 40°F to 95°F. (5°C to 35°C). Reviewing Current Temperature Setting s 69° is current room temperature. TEMP 69 SET TEMP F FILTER LO BAT HOLD HEAT COOL Press For 2 Seconds Or Less or s 68° indicates the current setting of the thermostat. s If pressed for more than 2 68 TEMP SET TEMP F FILTER seconds, you will adjust the set- LO BAT ting as explained below. HOLD HEAT COOL