Hunter 90064 Owner's Manual - Page 10
Secure the motor by tightening the 2 screws.
 |
View all Hunter 90064 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
B20 F 2 1 F Install the wiring cover plate. Make sure all wiring connections are inside the box or under the wiring cover plate. B22 B21 G• Tighten the wiring cover plate screw. B23 H Connect 4" duct and vent to the outside. Tape joints. If ducting does not fit securely, an adapter may need to be purchased. B24 Connect wiring from the motor to the wiring cover plate. B25 H I Reinstall the motor by inserting the tabs and pushing up into position. Make sure the wires are not pinched between the motor and the housing. 10 Secure the motor by tightening the 2 screws. 41722-01 09/09/2011
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
41722-01
09/09/2011
10
B20
F
1
2
F
•
B21
G
B22
B23
H
B24
H
B25
I
Install the wiring cover plate. Make sure all
wiring connections are inside the box or under
the wiring cover plate.
Tighten the wiring cover plate screw.
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
Secure the motor by tightening the 2 screws.
Connect 4” duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may need
to be purchased.
Connect wiring from the motor to the wiring cover plate.