Hunter 90064 Owner's Manual - Page 7

Turn on the power source.

Get Hunter 90064 PDF manuals and user guides View all Hunter 90064 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

A017 A18 H Connect 4" duct and vent to the outside. Tape joints. If ducting does not fit securely, an adapter may need to be purchased. A19 Connect wiring from the motor to the wiring cover plate. A20 H I Reinstall the motor by inserting the tabs and pushing up into position. Make sure the wires are not pinched between the motor and the housing. Secure the motor by tightening the 2 screws. A21 A22 ON OFF Turn on the power source. Test the motor. If the motor does not run, check the plug connection. 7 41722-01 09/09/2011

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
41722-01
09/09/2011
7
0
A17
H
A18
I
A20
A19
H
A21
ON
OFF
A22
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
Secure the motor by tightening the 2 screws.
Test the motor. If the motor does not run,
check the plug connection.
Turn on the power source.
Connect 4” duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may need
to be purchased.
Connect wiring from the motor to the wiring cover plate.