Hunter 90400 User Guide - Page 4

GROUNDING INSTRUCTIONS This appliance is for household use only and may be plugged into any 120-volt AC electrical outlet (ordinary household current). DO NOT use any other type of outlet. WARNING This unit is suitable for grounded receptacle use only. The cord has a grounded plug as shown in Figure 1. An adapter, as shown in Figure 2, is available for connecting three-blade groundingtype plugs to two-slot receptacles. The green grounding lug extending from the adapter must be connected to a permanent ground such as a property grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available. LINE CORD SAFETY TIPS 1. NEVER pull or yank on the cord or the appliance. 2. To insert plug, grasp it firmly and guide it into the outlet. 3. To disconnect the appliance, grasp the plug and remove it from the outlet. 4. Before each use, inspect the line cord for cuts and/or abrasion marks. If any are found, the appliance should be serviced and the line cord replaced. Please return it to our Service Department or to an authorized service representative. 5. NEVER wrap the cord tightly around the appliance, as this could place undue stress on the cord where it enters the appliance and could cause it to fray and break. 6. DO NOT operate appliance if the line cord shows any damage, if the appliance works intermittently or stops working entirely. Grounded Plug Adapter Metal Screw Grounding Pin Grounded Outlet Box Cover FIGURE 1 Grounding Means Grounded Outlet Box Cover FIGURE 2 ©2011 Hunter Fan Co. 4 44826-01 20111014