Hunter 90400 User Guide - Page 7

MAINTENANCE This fan is permanently lubricated and will not require additional lubrication (oil) for the life of the fan. This fan requires little maintenance and contains no user serviceable parts. DO NOT try to fix it yourself. Contact qualified service personnel if servicing is needed. TO CLEAN: 1. Before cleaning, turn fan off and unplug from electrical outlet. Wipe off excess dust with a lint free cloth. 2. To ensure adequate air circulation to the motor, keep vents located at the rear of the motor housing free from dust accumulation. A vacuum cleaner hose can be used to clean these vents. 3. DO NOT immerse the fan in water or any other liquid. CLEANING GRILL AND BLADE: 1. Turn the fan off and unplug from the electrical outlet. 2. Disassemble grills by carefully removing the screw on the bottom of the ring. See Figure 4. 3. Remove the ring. 4. Use a dry or slightly damp lint freecloth to clean the fan. 5. Use a soft, slightly damp cloth to wipe the remaining fan parts. 6. DO NOT allow water or any other liquid to get into the motor housing or base. 7. Reassemble the fan after blades and grills have dried completely. Align the grills, replace the ring, and replace the screw. 8. DO NOT plug fan into an electrical outlet until it has been fully reassembled. Front Grill Back Grill Blade Screw Handle Oscilation Knob Ring Power/Speed Control Switch Motor Housing Up/Down Adjustment Screw Base FIGURE 4 ©2011 Hunter Fan Co. 7 44826-01 20111014