Husqvarna 128L Owners Manual - Page 21

TECHNICAL DATA Technical data Engine Cylinder volume, cu.in./cm3 Cylinder bore, inch/mm Stroke, inch/mm Idle speed, rpm Recommended max. speed, rpm Speed of output shaft, rpm Max. engine output, acc. to ISO 8893, hp/kW Catalytic converter muffler Speed--regulated ignition system Ignition system Manufacturer/type of ignition system Spark plug Electrode gap, inch/mm Fuel and lubrication system Manufacturer/type of carburetor Fuel tank capacity, US pint/liter Weight Weight without fuel, cutting attachment and guard, lbs/kg Sound levels (see note 1) Equivalent sound pressure level at the user's ear, measured according to ANSI B175.3--1997, dB(A), min/max: Vibration levels Vibration levels at handles, measured according to ANSIB175.3--1997, m/s2 At idle, left/right handles: At max. speed, left/right handles: 128C 1.7/28 1.4/35 1.130/28.7 2,800--3,200 10,000 8,000 1.1/0.8 Yes Yes Walbro/CD Champion RCJ--8Y 0.024/0.6 Zama 0.85/0.4 10/4.4 94/97 3/5 9/8 128L 1.7/28 1.4/35 1.130/28.7 2,800--3,200 11,000 8,000 1.1/0.8 Yes Yes Walbro/CD Champion RCJ--8Y 0.024/0.6 Zama 0.85/0.4 11/4.8 94/97 3/5 9/8 Note 1: Equivalent noise pressure level is calculated as the time--weighted energy total for noise pressure levels under various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed. NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting equipment fitted. The table indicates the highest and lowest values. Model 128C (3/8 RH arbor shaft thread) Approved accessories Type Trimmer head T25 Cutting attachment / guard, part. no. 537 33 83--07 / 545 03 11--01 Model 128L (M10 LH arbor shaft thread) Approved accessories Type Trimmer head T25 Plastic blades Tricut 300 mm Cutting attachment / guard, part. no. 537 33 83--06 / 545 03 09-01 531 00 38--11 / 545 03 09-01 545196750 Rev. 3 2/17/09 English--- 21