Husqvarna 129LDX Operation Manual - Page 9
Assembly
View all Husqvarna 129LDX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ASSEMBLY NOTE: Make sure unit is assembled cor . Fitting the loop handle S Position the handle on the shaft. Note handle on Fitting the trimmer guard and trimmer head (Model 129 C) S Fit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the wing nut (B). S Fit the screw, securing plate and wing S Tighten Fitting the trimmer guard and trimmer head (Model 129 L) S Fit the correct trimmer guard (A) for use D B C B A C S Fit the dust cup (C) on the shaft. The nut must be completely covered by the dust cup. S Hold the dust cup with a wrench to prevent the shaft from rotating. S Screw the trimmer head (D) onto the shaft. D S To dismantle, follow the instructions in the reverse order. A A S Fit the drive disc (B) on the output shaft. S Turn the shaft until one of the holes in the dis gear S Insert hex wrench (C) in the hole to lock s S Screw on the trimmer head (H) in the op dir 9