Husqvarna 320iB Operation Manual - Page 14

STARTING AND STOPPING Check before starting Starting and stopping Li-ion • Check the product for dirt and cracks. Clean off grass and leaves from the engine using a brush. Gloves should be worn when necessary. • Check that the machine is in perfect working order. Check that all nuts and screws are tight. • Only use the machine for the purpose it was intended for. Connect battery to the machine • Make sure to use fully charged batteries. Use only a Husqvarna original battery in your machine. See technical data. • Insert the battery in the machine. The battery should slide easily into the battery holder on the machine. If the battery does not slide in easily, it is not being inserted correctly. WARNING! Make sure no unauthorised ! persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 meters (50 ft.). Starting • Activate the machine by moving the ON/OFF switch lever to position ON. • Press on the lower part of the battery and push it in as far as it will go into the battery compartment. The battery will lock itself into place when you hear a click. Make sure the latches snap in place properly. • Use the power trigger to control the speed. Stopping • Stop and deactivate the machine by releasing the Power trigger and move the ON/OFF switch lever to position OFF. • Remove the battery from the machine by pressing the two release buttons and pulling out the battery. NOTE! Make sure to switch OFF the machine when changing battery. 14 - English IMPORTANT! Always remove the battery to prevent the machine being started by accident.