Husqvarna 326LS Owners Manual - Page 23
Technical Data
View all Husqvarna 326LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
TECHNICAL DATA Technical data 326C 326L/326LS 326Lx 326LDx Engine Cylinder displacement, cu.in/cm3 1,50/24,5 1,50/24,5 1,50/24,5 1,50/24,5 Cylinder bore, inch/mm 1,34/34,0 1,34/34,0 1,34/34,0 1,34/34,0 Stroke, inch/mm 1,06/27 1,06/27 1,06/27 1,06/27 Idle speed, rpm 2700 2700 2700 2700 Recommended max. fast idle speed, rpm 11000-11700 11000-11700 11000-11700 11000-11700 Speed of output shaft, rpm 11700 8014 8014 8014 Max. engine output, acc. to ISO 8893, kW/ rpm 0,9/8400 0,9/8400 0,9/8400 0,9/8400 Catalytic converter muffler Yes Yes Yes Yes Speed-regulated ignition system No Yes Yes Yes Ignition system Manufacturer/type of ignition system WalbroMB/ SEM AM49 WalbroMB/ SEM AM49 WalbroMB/ SEM AM49 WalbroMB/ SEM AM49 Spark plug Champion RCJ 6Y Champion RCJ 6Y Champion RCJ 6Y Champion RCJ 6Y Electrode gap, inch/mm 0,02/0,5 0,02/0,5 0,02/0,5 0,02/0,5 Fuel and lubrication system Manufacturer/type of carburetor Zama C1Q Zama C1Q Zama C1Q Zama C1Q Fuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5 1,06/0,5 1,06/0,5 Weight Weight without fuel, cutting attachment and guard, Lbs/kg 9,5/4,3 9,0/4,1 9,7/4,4 9,9/4,5 Sound levels (see note 1) Equivalent sound pressure level at the user′s ear, measured according to ANSI B175.3-1997, 91/98 dB(A), min/max: 91/97 91/97 91/98 Vibration levels Vibration levels at handles, measured according to ANSI B175.3-1997, m/s2 At idle, left/right handles, min.: 2,7/1,5 1,7/1,5 1,7/1,5 1,7/1,5 At idle, left/right handles, max.: 3,5/1,7 2,7/1,8 2,7/1,8 2,8/1,8 At max. speed, left/right handles, min.: 4,4/4,8 3,9/5,2 3,9/5,2 3,9/5,2 At max. speed, left/right handles, max.: 5,7/5,7 7,2/9,8 7,2/9,8 7,2/9,8 Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed. NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting equipment fitted. The table indicates the highest and lowest values. English - 23