Husqvarna 329L Owner Manual - Page 16
To add grease to the bevel gear
View all Husqvarna 329L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1. Remove the air filter cover and remove the air filter. 2. Put the air filter in a plastic bag. 3. Put the air filter oil in the plastic bag. 2. Clean the air filter with warm soap water. Make sure that the air filter is dry before you install it. 3. Replace the air filter if it is too dirty to fully clean it. Always replace a damaged air filter. 4. If your product has a foam air filter, apply air filter oil. Only apply air filter oil to a foam filter. Do not apply oil to a felt filter. To apply air filter oil to the air filter 4. Push the plastic bag to make sure the oil supplies equally across the air filter. 5. Push on the air filter, while in the bag, to remove the air filter oil that is not necessary. Remove the air filter from the bag. 6. Install the air filter. To add grease to the bevel gear Make sure that the bevel gear is filled 3/4 full with bevel gear grease. CAUTION Always use special air filter oil on foam air filters. Do not use other types of oil. WARNING Do not get oil on your body. 1. Remove the air filter cover and remove the air filter. 16 1293 - 001 - 18.09.2019