Husqvarna 365 Operation Manual - Page 3

CONTENTS Before using a new saw • Read the instructions carefully. • Check cutting equipment is correctly fitted and adjusted. See page 25. • Refuel and start the saw. Check the carburetor settings. See pages 26-29. • Do not use the saw until sufficient chain oil has reached the chain, see page 14. IMPORTANT! If the carburetor mixture is too lean it greatly increases the risk of engine failure. Poor maintenance of the air filter will cause carbon build-up on the spark plug and lead to difficult starting. If the chain is badly adjusted it will cause increased wear or damage to the bar, drive sprocket and chain. Maintenance, replacement, or repair of the emission control devices and systems may be performed by any nonroad engine repair establishment or individual. ! WARNING! Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine spare parts/accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others. Your warranty does not cover damage or liability caused by the use of non-authorized accessories or replacement parts. You will find the following labels on your chain saw: Contents Key to symbols 2 Safety instructions Personal protective equipment 4 Chain saw safety equipment 4 Inspecting, maintaining and servicing chain saw safety equipment 8 Cutting equipment 10 How to avoid kickback 16 General safety precautions 18 General working instructions 19 What is what? What is what 24 Assembly Mounting guide bar and chain 25 Fuel handling Fuelmix 26 Fuelling 27 Start and stop Start and stop 28 Maintenance Carburetor 29 Starter device 30 Air filter 31 Spark plug 31 Muffler 31 Needle bearing maintenance 31 Adjustment of the oil pump 31 Cooling system 32 Centrifugal cleaning "Air Injection 32 Heated handles (362XPG/371XPG 32 Winter use 32 Daily maintenance 33 Weekly maintenance 33 Monthly maintenance 33 Technical data 362XP 34 365 34 371XP 34 Federal Emission Control Warranty Statement Your warranty rights and obligations 35 3 English -