Husqvarna 395 XP G Owners Manual - Page 2

KEY TO SYMBOLS Symbols on the machine: WARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Always wear: • Approved protective helmet • Approved hearing protection • Protective goggles or a visor Symbols in the operator's manual: Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance. Always wear approved protective gloves. Both of the operator′s hands must be used to operate the chain saw. Regular cleaning is required. Never operate a chain saw holding it with one hand only. Visual check. Never let the guide bar tip come in contact with any object. WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury. Decompression valve: The valve is to reduce the pressure in the cylinder and make starting easier. You should always use the decompression valve when starting the machine. Ignition; choke: Set the choke control in the choke position. This should automatically set the stop switch to the start position. Air purge Adjustment of the oil pump Chain brake, activated (right) Chain brake, not activated (left) Protective goggles or a visor must be worn. Refuelling. Filling with oil and adjusting oil flow. The chain brake must be engaged when the chain saw is started. WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury. Other symbols/decals on the machine refer to special certification requirements for certain markets. 2 - English