Husqvarna 395 XP G Owners Manual - Page 40

TECHNICAL DATA Recommended original and replacement bar and chain combinations The Husqvarna 395XP is in the ANSI category of saws above 3,8 cu. in. and is not required to comply with low kickback performance requirements. However, for this model we recommend the following cutting equipment. Length, inch 18 20 24 28 Pitch, inch 3/8 3/8 3/8 3/8 Bar Gauge, inch 0,058 Max. nose radius 11T 11T 11T 11T Chain Type Drive link count 68 Husqvarna H42, 72 Husqvarna H48 84 93 Note: For the chains above you are free to choose between 0,050", 0,058" and 0,063" gauge drive link for the corresponding bar, see the table below. 0,050"/1,3 mm 0,058"/1,5 mm 0,063"/1,6 mm H46 H47 H42 H48 H45 H50 WARNING! This chain saw model is capable of severe kickback that could result in serious injuries ! to the user. Do not operate this saw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Saws with significantly reduced kickback potential are available. Always use the safest saw and cutting equipment applicable to your cutting need. Saw chain filing and file gauges 40 - English