Husqvarna 414EL Operation Manual - Page 6

KEY TO SYMBOLS Symbols on the machine: Translation of the original Swedish operating instruction. Risk of electric shock. WARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others. Remove plug from power supply immediately if the cable is damaged or cut. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Chain brake, activated (right) Chain brake, not activated (left) Always wear: • Approved protective helmet • Hearing protection • Protective goggles or a visor Both of the operator′s hands must be used to operate the chain saw. Never operate a chain saw holding it with one hand only. Never let the guide bar tip come in contact with any object. WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury. Chain oil fill. Environmental marking. Symbols on the product or its packaging indicate that this product cannot be handled as domestic waste. It must instead be submitted to an appropriate recycling station for the recovery of electrical and electronic equipment. Do not expose to rain. Double insulation Other symbols/decals on the machine refer to special certification requirements for certain markets. Direction of rotation of the saw chain and maximum length of the guide bar. Recommended cutting equipment in this example: Bar length 16 inches - Max. nose radius 7Teeth - Chain type Husqvarna H37 Keep bystanders away. Disconnect the plug before adjusting or cleaning. 6 - English