Husqvarna 465 Rancher Operation Manual - Page 15
Tensioning the chain, Rancher II, 465 Rancher II, 455e Rancher II, 455e Rancher II TrioBrake,
View all Husqvarna 465 Rancher manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
GENERAL SAFETY PRECAUTIONS Tensioning the chain 455e Rancher II, 455e Rancher II TrioBrake WARNING! A slack chain may jump off ! the bar and cause serious or even fatal injury. The more you use a chain the longer it becomes. It is therefore important to adjust the chain regularly to take up the slack. Check the chain tension every time you refuel. NOTE! A new chain has a running-in period during which you should check the tension more frequently. Tension the chain as tightly as possible, but not so tight that you cannot pull it round freely by hand. • Release the knob by folding it out. • Turn the knob anti clockwise to loosen the bar cover. • Adjust the tension on the chain by turning the wheel down (+) for tighter tension and up (-) to loosen the tension. 455 Rancher II, 465 Rancher II • Loosen the bar nuts that hold the clutch cover/chain brake. Use the combination spanner. Then tighten the bar nuts by hand as tight as you can. • Tighten the clutch cover by turning the knob clockwise while lifting tip of bar. • Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw using the combination spanner. Tighten the chain until it does not sag from the underside of the bar. • Fold the knob back in to lock the tensioning. • Use the combination spanner to tighten the bar nuts while lifting the tip of the bar at the same time. Check that you can pull the chain round freely by hand and that it does not sag from the underside of the bar. The position of the chain tensioning screw on our chain saws varies from model to model. See instructions under the heading What is what? to find out where it is on your model. Lubricating cutting equipment WARNING! Poor lubrication of cutting ! equipment may cause the chain to snap, which could lead to serious, even fatal injuries. Chain oil Chain oil must demonstrate good adhesion to the chain and also maintain its flow characteristics regardless of whether it is warm summer or cold winter weather. As a chain saw manufacturer we have developed an optimal chain oil which has a vegetable oil base. We recommend the use of our own oil for both maximum English - 15