Husqvarna 535LK Owner Manual - Page 6
Safety devices on the product, To do a check of the throttle trigger lockout
View all Husqvarna 535LK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ANSI Z87.1 standard in the USAs or EN 166 in EU countries. • Use gloves when necessary, for example when you attach, examine or clean the cutting equipment. • Use protective boots with steel toes and non-slip soles. The life span of the product can be reduced and the risk of accidents can increase if product maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest servicing dealer. WARNING: Never use a product with defective safety components. The product's safety equipment must be inspected and maintained as described in this section. If your product fails any of these checks, contact your service agent to get it repaired. CAUTION: All servicing and repair work on the machine requires special training. This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent. • Use clothing made of a strong fabric. Always use heavy, long pants and long sleeves. Do not use loose clothing that can catch on twigs and branches. Do not wear jewelry, short pants, sandals or go with bare feet. Put your hair up safely above shoulder level. • Keep first aid equipment close at hand. To do a check of the throttle trigger lockout The throttle lockout is designed to prevent accidental operation of the throttle control. 1. Press the throttle trigger lockout (A) and make sure that the throttle control is released (B). When you release the handle the throttle control and the throttle trigger lockout both move back to their initial positions. This movement is controlled by two independent return springs. This arrangement means that the throttle control is automatically locked at the idle setting. A B Safety devices on the product 2. Make sure that the throttle control is locked at the idle setting when the throttle trigger lockout is released. WARNING: Read the warning instructions that follow before you use the product. In this section the product's safety features, its purpose and how checks and maintenance should be carried out to ensure that it operates correctly. See instructions under the heading Product overview on page 2 to find where these parts are located on your product. 6 331 - 008 - 24.04.2020