Husqvarna AR19 Operation Manual - Page 25

Power Unit Engine Manufacturer Type Power Clutch Primary Drive Secondary Drive Gear Reduction Wheels Bearings Rear Tires Front Tire Aeration Tines Aeration Width Hole Pattern Core Depth Holes per sq ft Working Speed Productivity Weights and Dimensions Net weight Shipping weight Removable weights Height with handle folded Height overall Length with handle folded Length Overall Width Vibration Daily Exposure Hand/Arm A(8) Equivalent Vibration Hand/Arm Ahv,eq Standard Deviation Hand/Arm Noise Measured Value Guaranteed Value Operator Ear TECHNICAL DATA AR25 / 968982105 Honda GX120K1HX2 4 hp* / 2.98kW Belt Tensioner V-Belt Permalube Chain 6:1 *The power rating of the engine indicated is the average net power output (at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed in the final machine will depend on the operating speed, environmental conditions and other variables. Front - ¾" (1.9 cm) sealed ball bearings with stamping kit Rear - ¾" (1.9 cm) roller bearing 8" x 2" (20 cm x 5 cm) solid rubber 10" x 6" (25 cm x 15 cm) semi-pneumatic ¾" (1.9 cm) open spoon tine, 42 per unit 25.5" (64.8 cm) 33/5" x 6½" (9 cm x 16.5 cm) Up to 3" (7.6 cm) 8.1 290 ft/min (5.3 km/h) Up to 40,000 sq ft/hr (3716 m2/h) 420 lbs (191 kg) 487 lbs (221 kg) 2 x 36 lbs (16.3 kg) 28" (71.1 cm) 52" (132 cm) 33" (83.3 cm) 54" (137 cm) 38" (96.5 cm) 2.60 m/s2 3.68 m/s2 0.3 m/s2 97 dB(A) 98 dB(A) 89 dB(A) 25