Husqvarna AR19H Owners Manual - Page 14

Maintenance and Service Instructions PREVENTATIVE MAINTENANCE SCHEDULE A) Inspection Schedule Item • Engine Oil • Gear box oil • Engine air cleaner • Clutch & cable • Chain tension • Belt wear & tension • Tine wear & condition • Fasteners • Sprockets & set screws • Frame condition • Decals B) Lubrication Schedule Out of Box First 5 hrs. Every 10 hrs • • • • • Each Use • • • • Item • Engine • GearBox • Rear wheels • Chain • Tines • Linkage Lubricant Every 20 hrs Oil, see engine Owner's manual Oil, see engine Owner's manual Lithium based grease Graphite dry lubricant (Aerosol) Light machine oil 30W oil •(*) Every 60 hrs As Required • • • • • (*) after each pressure wash or steam cleaning Storage TINE WEAR After your Husqvarna Aerator has been used for sometime, the tines will wear. When this happens their aerating performance will diminish. Inspect tines using the drawing, replace when at minimum length or before. (Tines are 5" when new.) ENGINE SERVICE AND MAINTENANCE Follow the engine manufacturers maintenance instructions. Should any malfunction occur with the engine during the warranty period, take it to an Authorized Service Dealer. DO NOT tear down the engine, as this may void the Engine Manufacturers Warranty NOTE: Refer to engine manufacturers owners manual for all engine service information. 14