Husqvarna HUV4214G Owners Manual - Page 16
Key Switch
View all Husqvarna HUV4214G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Controls and Indicators 9 10 8 12 A 6 3 CB 4 14 2 11 7 1 829 Figure 5 Instrument Panel KEY SWITCH The key switch (7) is mounted on the instrument panel to the right of the steering column (Figure 5). It has three positions: OFF, ON, and START. To start the vehicle, place the Forward/Reverse handle in the NEUTRAL position and turn the key to the START position, and hold it there until the engine starts. Activate the choke (14) as necessary. If the engine does not start after 10-15 seconds, release the key and repeat the procedure. Once the engine starts, release the key and it will return to the ON position. The engine will idle in neutral. The engine will continue to idle until the key is turned to the OFF position. See following WARNING, CAUTION, and NOTE. WARNING • Moving parts! Keep clear of the engine compartment while the engine is running. CAUTION • Do not shift the Forward/Reverse handle while the accelerator pedal is pressed. Shift the handle only when the vehicle is at a complete stop and the engine is at idle. Failure to heed this caution could result in damage to the transmission. Page 14 2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner's Manual