Husqvarna HUV4214G Owners Manual - Page 35

Periodic Lubrication Schedule PERIODIC SERVICE SCHEDULE REGULAR INTERVAL SERVICE Engine Annual service by trained technician only (or every 100 hours of operation, whichever comes first) Engine air intake system General vehicle Fuel filters Clutch cover vent inlet filter (if equipped) Check for leaks around gaskets, fill plugs, etc. Adjust valve clearance. See Briggs and Stratton Vanguard Model 2900000 Service Manual. Inspect, clean, and gap spark plug; replace if necessary. See authorized dealer or trained technician for service. Replace air filter element. See Air Intake System on page 42. Check clamps for tightness; check hose for cracks. Check for loose hardware and tighten if necessary. Replace. Dispose of used filters properly. Replace. Dispose of used filters properly. WARNING • If any problems are found during scheduled inspection or service, do not operate vehicle until repairs are made. Failure to make necessary repairs could result in fire, property damage, severe personal injury, or death. PERIODIC LUBRICATION SCHEDULE PERIODIC LUBRICATION SCHEDULE REGULAR INTERVAL SERVICE First change 5 - 8 hours - additional change every 100 hours of operation or annually, whichever comes first Change every 50 hours of operation or semiannually whichever comes first Change every 100-400 hours of operation or semiannually whichever comes first First change 50 hours - additional change every 100 hours of operation or annually, whichever comes first Change engine oil and oil filter Driveshafts and bearing blocks Change front differential lubricant Change rear transaxle lubricant LUBRICATION POINTS 1 2 RECOMMENDED LUBRICANT 1 - 1/2 qt. (1.4L) with filter, 10W-30 API classification SJ See Oil Viscosity on page 39. Chassis Lube (EP NLGI Grade 2) 5 oz. (170 mL) 80W90 Gear Oil 1 gal. (3.79 L) 10W-30 SF, SG, SH 2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner's Manual Page 33