Husqvarna K 1270 Operation Manual - Page 2

KEY TO SYMBOLS A 50163 45-03 Manual version This manual is the North American version used in the US and Canada. It contains information specific for North America which may not be applicable to countries outside North America. Symbols on the machine WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Wear personal protective equipment. See instructions under the heading "Personal protective equipment". WARNING! Dust forms when cutting, this can cause injuries if inhaled. Use an approved breathing mask. Avoid inhaling exhaust fumes. Always provide for good ventilation. WARNING! Kickbacks can be sudden, rapid and violent and can cause life threatening injuries. Read and understand the instructions in the manual before using the machine. WARNING! Sparks from the cutting blade can cause fire in combustible materials such as: petrol (gas), wood, clothes, dry grass etc. Ensure the blades are not cracked or damaged in any other way. Starter handle Refuelling, petrol/oil mix Starting instruction decal See instructions under the heading Starting and stopping. Cutting equipment decal A= Cutting blade diameter B= Max. speed of output shaft C= Max blade thickness C D EE B D= Direction of blade rotation E= Bushing dimension Type plate Row 1: Brand, Model (X,Y) Row 2: Serial No. with manufacturing date (y, W, X): Year, Week, Sequence No. Row 3: Product No. (X) XXXXXXXXX YYYY s / n YYYY WWXXXXX XXX XX XX-XX Husqvarna AB Huskvarna, SWEDEN XXXXXXXXXXX XXXXXXXXXXXX (YY) Row 4: Manufacturer Row 5: Manufacturer address Row 6-7: If applicable, EC typ-approval (X, Y): Approval code, Approval stage The Emissions Compliance Period referred to on the Emission Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal and California emissions requirements. Do not use circular saw blades Underwriters Laboratories Inc. (UL) has UL listed this machine as compliant to ANSI B175.4 US Safety standard. Choke ANSI B175.4-2013 EMISSION CONTROL INFORMATION ® 0 74cc EM/N B HUSQVARNA AB, HUSKVARNA, MADE IN SWEDEN THIS ENGINE MEETS U.S. EPA EXH/EVP REGS FOR 22001616 SORE. REFER TO OPERATOR'S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS. EMISSIONS COMPLIANCE PERIOD: 300 HRS Other symbols/decals on the machine refer to special certification requirements for certain markets. Decompression valve 2 - English