Husqvarna K 1270 Operation Manual - Page 25

General MAINTENANCE WARNING! The user must only carry out the maintenance and service work described in this ! manual. More extensive work must be carried out by an authorized service workshop. The engine should be switched off, and the stop switch in STOP position. Wear personal protective equipment. See instructions under the heading "Personal protective equipment". The life span of the machine can be reduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest servicing dealer. • Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs. Maintenance schedule In the maintenance schedule you can see which parts of your machine that require maintenance, and with which intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending on the rate of usage. Daily Maintenance Cleaning External cleaning Cooling air intake Weekly maintenance Cleaning Monthly maintenance Cleaning Spark plug Fuel tank Functional inspection General inspection Throttle lockout* Stop switch* Blade guard* Cutting blade** Functional inspection Vibration damping system* Muffler* Drive belt Carburetor Starter housing Functional inspection Fuel system Air filter Drive gear, clutch *See instructions in the section "Machine's safety equipment". ** See instructions in the section "Cutting blades" and "Assembly and settings". Cleaning External cleaning • Clean the machine daily by rinsing it with clean water after the work is finished. English - 25