Husqvarna LTH18538 Owners Manual - Page 7

INSTALL SEAT See Figs. 3 and 4, TO ADJUST SEAT See Fig. 4, TO INSTALL HOOD SCOOP See Fig. 5, Fig. 3 - tractor

Get Husqvarna LTH18538 PDF manuals and user guides View all Husqvarna LTH18538 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

ASSEMBLY INSTALL SEAT (See Figs. 3 and 4) • Remove bolt and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor. Remove the cardboard packing and discard. • Connect switch to seat. • Place seat on seat pan so all three (3) bottom pads are positioned over large slotted holes in pan. TO INSTALL HOOD SCOOP (See Fig. 5) SEAT SWITCH PAD SLOT SEAT PAN TAPE WIRING HARNESS Fig. 3 • Push down on seat to engage pads in slots and pull seat towards rear of tractor. • Raise seat and tighten bolt securely. • Remove tape and discard. • Lower seat into operating position and sit on seat. Press clutch/brake pedal all the way down. If operating position is not comfortable, adjust seat. TO ADJUST SEAT (See Fig. 4) • Grasp adjustment handle and pull up, slide seat to desired position and release adjustment handle. SLOT PAD FLAT WASHER TAPE SEAT PAN BOLT TAB Fig. 4 ADJUSTMENT HANDLE Fig. 5 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
7
ASSEMBLY
INSTALL SEAT (See Figs. 3 and 4)
•
Remove bolt and flat washer securing seat to cardboard
packing and set aside for assembly of seat to tractor.
Remove the cardboard packing and discard.
•
Connect switch to seat.
•
Place seat on seat pan so all three (3) bottom pads
are positioned over large slotted holes in pan.
WIRING HARNESS
SEAT
SWITCH
PAD
TAPE
SEAT
PAN
SLOT
•
Push down on seat to engage pads in slots and pull
seat towards rear of tractor.
•
Raise seat and tighten bolt securely.
•
Remove tape and discard.
•
Lower seat into operating position and sit on seat.
Press clutch/brake pedal all the way down. If operating
position is not comfortable, adjust seat.
TO ADJUST SEAT (See Fig. 4)
•
Grasp adjustment handle and pull up, slide seat to
desired position and release adjustment handle.
BOLT
FLAT
WASHER
SEAT PAN
PAD
TAPE
SLOT
TAB
ADJUSTMENT
HANDLE
Fig. 3
Fig. 4
TO INSTALL HOOD SCOOP (See Fig. 5)
Fig. 5