Husqvarna MADSAW Owner Manual - Page 3
Symbols on the product, EPA III
View all Husqvarna MADSAW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
21. Transport guard, bar 22. Combination wrench 23. Combination wrench, chain tensioner 24. Harness 25. Spark plug cap and spark plug 26. Shaft coupling 27. Impact guard 28. Dielectric chain oil 29. Two-stroke engine oil 30. Short shaft 31. Long shaft 32. Branch hook 33. Storage bag for dielectric shaft Symbols on the product Warning! This product is dangerous. Injury or death can occur to the operator or bystanders if the product is not used carefully and correctly. To prevent injury to the operator or bystanders, read and obey all safety instructions in the operator's manual. Read the operator's manual carefully and make sure that you understand the instructions before use. Use a protective helmet in locations where objects can fall on you. Use approved hearing protection. Use approved eye protection. Use approved protective gloves during operation and maintenance. Use protective boots or shoes with non-slip soles. Use clothing of strong fabric and of full length. Choke. Always keep your hands behind the guard ring. yyyywwxxxxx The rating plate shows the serial number. yyyy is the production year, ww is the production week and xxxxx is the sequential number. The operator of the product must ensure, while working, that no persons or animals come closer than 15 meters (50 ft). For use by trained and qualified personnel only per OSHA 1910.269(r). Untrained and non-professionals: Do not use within 11m (36 ft) of electrical hazards. Tool must be clean, dry, and working properly before use. Follow all company practices and procedures. Note: Other symbols/decals on the product refer to certification requirements for other commercial areas. EPA III Fuel. Chain oil. Adjustment of the oil flow. Direction of rotation, saw chain. Primer bulb. The Emissions Compliance Period referred to on the Emission Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emissions requirement. 1480 - 009 - 26.01.2022 3