Husqvarna MZ 5225 Owners Manual - Page 40

Engine Cooling Air Intake, Throttle Cable, Choke Cable

Get Husqvarna MZ 5225 PDF manuals and user guides View all Husqvarna MZ 5225 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

MAINTENANCE Engine Cooling Air Intake Check that the engine's cooling air intake is free from leaves, grass, and dirt. If the cooling air intake is clogged, engine cooling deteriorates, which can lead to engine damage. The cooling air intakes rotates when the engine is running. Mind your fingers. Throttle Cable Check that the engine responds to throttle increases and that a good engine speed is attained at full throttle. If doubts arise, contact the service workshop. If adjustments are necessary, they can be made as follows for the lower cable: 1. Loosen the clamping screw for the cable's outer casing and move the throttle to the full throttle position. 2. Check that the throttle cable is mounted in the correct hole in the lower lever, see illustration. 3. Push the throttle cable's outer casing as far to the right as possible and tighten the clamping screw. Check and clean the cooling air intake Adjusting the throttle cable Choke Cable If the engine produces black smoke or is difficult to start, this can be because the choke cable is incorrectly adjusted (upper cable). If doubts arise, contact the service workshop. If adjustments are necessary, they can be made as follows: 1. Loosen the clamping screw for the cable's outer casing and push the choke control fully in. 2. Check that the choke cable is mounted in the upper lever, see illustration. Push the choke cable's outer casing as far to the left as possible and tighten the clamping screw. Adjusting the choke cable English-40 8061-014 8011-605 8011-605

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
English
-40
MAINTENANCE
Engine Cooling Air Intake
Check that the engine’s cooling air intake is free from
leaves, grass, and dirt.
If the cooling air intake is clogged, engine cooling
deteriorates, which can lead to engine damage.
The cooling air intakes rotates when the engine is
running. Mind your fingers.
Throttle Cable
Check that the engine responds to throttle increases
and that a good engine speed is attained at full
throttle.
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as
follows for the lower cable:
1. Loosen the clamping screw for the cable’s outer
casing and move the throttle to the full throttle
position.
2.
Check that the throttle cable is mounted in the
correct hole in the lower lever, see illustration.
3.
Push the throttle cable’s outer casing as far to the
right as possible and tighten the clamping screw.
Choke Cable
If the engine produces black smoke or is difficult
to start, this can be because the choke cable is
incorrectly adjusted (upper cable).
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as
follows:
1. Loosen the clamping screw for the cable’s outer
casing and push the choke control fully in.
2.
Check that the choke cable is mounted in the
upper lever, see illustration. Push the choke cable’s
outer casing as far to the left as possible and
tighten the clamping screw.
8061-014
Check and clean the cooling air intake
8011-605
Adjusting the throttle cable
Adjusting the choke cable
8011-605