Husqvarna MZ 52LE Owners Manual - Page 22

WARNING, MAINTENANCE, Daily, At least, Maintenance interval, in hours, Before, After

Page 22 highlights

MAINTENANCE MAINTENANCE Check/adjust throttle cable Check the condition of belts, belt pulleys Change the engine oil 1) Replace the engine oil filter Clean/replace the spark plugs Replace the fuel filter Replace paper air filter 2) Check the caster wheels (every 200 hours) Replace the air cleaner's foam pre-filter 2) Change the hydraulic oil (every 500 hours) Replace the hydraulic oil filter (every 500 hours) Dismantle and inspect starter 3) (every 500 hours) Check/adjust the mower deck Check the engine valve clearance 3) Perform the 500-hour service 3) Daily Before After At least once each year ● ♦ ♦ Maintenance interval in hours 50 250 500 ■ ● ■ ■ ■ ● ■ ● 1) First change after 8-10 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours. 2) In dusty conditions, cleaning and replacement are required more often. 3) Performed by authorized service workshop. ● = Described in this manual ♦ = Not described in this manual ■ = Refer to the engine manufacturer's manual WARNING! Before performing any service or adjustment checklist • Engage the park brake. • Place the Blade-switch in the disengaged position. • Turn the ignition switch to OFF position and remove the key. • Make sure the blades and all moving parts have completely stopped. WARNING! Escaping hydraulic oil under pressure can have sufficient force to penetrate the skin, causing serious injury. If injured by escaping fluid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immediately. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

WARNING
!
Before performing any service or
adjustment checklist
Engage the park brake.
Place the Blade-switch in the disengaged position.
Turn the ignition switch to OFF position and remove
the key.
Make sure the blades and all moving parts have
completely stopped.
1)
First change after 8-10 hours. When operating with a heavy load or
at high ambient temperatures, replace every 50 hours.
2)
In dusty conditions, cleaning and replacement are required more
often.
3)
Performed by authorized service workshop.
= Described in this manual
= Not described in this manual
= Refer to the engine manufacturer's manual
WARNING
!
Escaping hydraulic oil under pressure can have sufficient
force to penetrate the skin, causing serious injury. If injured
by escaping fluid, see a doctor at once. Serious infection
or reaction can develop if proper medical treatment is not
administered immediately.
MAINTENANCE
Daily
At least
once
each
year
Maintenance interval
in hours
Before
After
50
250
500
Check/adjust throttle cable
Check the condition of belts, belt pulleys
Change the engine oil
1)
Replace the engine oil filter
Clean/replace the spark plugs
Replace the fuel filter
Replace paper air filter
2)
Check the caster wheels (every 200 hours)
Replace the air cleaner’s foam pre-filter
2)
Change the hydraulic oil (every 500 hours)
Replace the hydraulic oil filter (every 500 hours)
Dismantle and inspect starter
3)
(every 500 hours)
Check/adjust the mower deck
Check the engine valve clearance
3)
Perform the 500-hour service
3)
22
MAINTENANCE