Husqvarna RZ4219 Owners Manual - Page 40
Cutting Blades, Blade replacement
View all Husqvarna RZ4219 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
MAINTENANCE Cutting Blades In order to attain the best mowing effect, it is important that the blades are well sharpened and not damaged. Bent or cracked blades or blades with large nicks should be replaced. IMPORTANT INFORMATION The sharpening of blades should be carried out by an authorized service workshop. Damaged blades should be replaced when hitting obstacles that result in a breakdown. Let the service workshop decide whether the blade can be repaired/ ground or must be replaced. Balance the blades after sharpening. Check the blade mounts. Check the blades WARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. 8011-604-1 Blade replacement 1. Remove blade bolt by turning counterclockwise. 2. Install new or resharpened blade with stamped "GRASS SIDE" facing towards ground/grass (down) or "THIS SIDE UP" facing deck and cutter housing. 3. Install and tighten blade bolt securely. 4. Torque blade bolt to 90 ft/lbs (122 Nm). 1 2 IMPORTANT INFORMATION Special blade bolt is heat treated. Replace with a Husqvarna bolt if required. Do not use lower grade hardware than specified. 1. Blade 2. Blade bolt (special) 3. Cutter housing Blade attachment 3 8058-027 40