Husqvarna RZ4219 Owners Manual - Page 43
Cleaning, Caster Wheels, Hardware, material to the tires. Excessive loads created
View all Husqvarna RZ4219 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
MAINTENANCE Cleaning Regular cleaning and washing, especially under the mower deck, will increase the machine's life-span. Make it a habit to clean the machine directly after use (after it is cooled), before the dirt sticks. Do not spray water on the top of the mower deck. Use compressed air to clean the top side of mower deck. Regularly clean deck and underside of the deck with normal water pressure. Do not use a high pressure washer or steam cleaner. Avoid spraying engine and electrical components with water Do not rinse hot surfaces with cold water. Let unit cool before washing. Caster Wheels Check every 200 hours. Check that wheels rotate freely. If wheels do not rotate freely take the unit to your dealer for service. Foam filled tires or solid tires will void the warranty. IMPORTANT INFORMATION DO NOT add any type of tire liner or foam fill material to the tires. Excessive loads created by foam filled tires will cause premature failures. Only use O.E.M. specified tires. Removal and installation of caster wheel Remove nut and caster bolt. Pull the wheel out of the yoke and take care of the spacers. Install in reverse order. Tighten caster bolt. Hardware Check daily. Inspect the entire machine for loose or missing hardware. IMPORTANT INFORMATION Use protective glasses when cleaning and washing. 2 1 4 3 1. Caster yoke 2. Caster bolt 3. Caster long spacer 4. Caster small spacers Caster wheels 8011-619-4 43