Husqvarna S427 Operation Manual - Page 12

Rear Stabilizer Rear stabilizer must be positioned down and locked in place when operating in the horizontal position. 1. Remove hair pin from upper lock pin and slide lock pin out of brackets. 2. Rotate rear stabilizer down until holes in stabilizer align with holes in brackets. 3. Insert lock pin all the way through brackets and stabilizer. 4. Reinstall hairpin. Work Position Horizontal Beam Assembly Lock Locks the beam in the horizontal operating position. To move beam to vertical operating position: 1. Pull beam lock out until the pin clears the mount. 2. Rotate beam lock slightly so pin does not return to hole in mount. 3. Lift beam until it rotates to vertical position. Rear stabilizer must be positioned up and locked in place when operating in the vertical position. 1. Remove hair pin from upper lock pin and slide lock pin out of brackets. 2. Insert lock pin through brackets and through splitter beam to lock beam in vertical position. 3. Reinstall hairpin. Work Position Vertical To move beam to horizontal position: 4. Set the rear stablilzer to the correct position. 5. Carefully rotate beam down until seated on lock bracket. 6. Turn beam lock until pin lines up with hole in lock bracket and release. 7. Ensure that the beam lock pin fully engages in bracket. CAUTION! Beam assembly is heavy. Use care when moving between vertical and horizontal positions. - 12 -