Husqvarna YTA24V48 Owners Manual - Page 21

ATTACH REAR LIFT LINKS C - Lift rear corner of, See Mower Drive Belt Installation in TO REPLACE MOWER

Get Husqvarna YTA24V48 PDF manuals and user guides View all Husqvarna YTA24V48 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

SERVICE AND ADJUSTMENTS A B Fig. 23 • ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring. • Repeat on opposite side of tractor. • Check Front-To-Back Adjustment in "TO LEVEL MOWER" in this section. F O P E Q H Fig. 25 • Install belt onto electric clutch pulley (M). C M D Fig. 24 • ATTACH FRONT LINK (E) - Work from left side of tractor. Insert threaded rod end of link assembly through front hole in tractor suspension bracket (F). • Install bushing (O) and loosely install nut (P) and jam nut (Q). • Insert flared ends of link (E) into slots in front mower bracket (H). Fig. 26 IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES. • Raise attachment lift lever to highest position. • If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual. See Mower Drive Belt Installation in "TO REPLACE MOWER BLADE DRIVE BELT" in this section of the manual. A M F OP Q C E H D C B D Fig. 27 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
21
SERVICE AND ADJUSTMENTS
Fig. 25
Fig. 26
•
Install belt onto electric clutch pulley (M).
Fig. 23
Fig. 24
•
ATTACH REAR LIFT LINKS (C) - Lift rear corner of
mower and position slot in link assembly over pin on
rear mower bracket (D) and secure with washer and
retainer spring.
•
Repeat on opposite side of tractor.
•
ATTACH FRONT LINK (E) - Work from left side of trac-
tor. Insert threaded rod end of link assembly through
front hole in tractor suspension bracket (F).
•
Install bushing (O) and loosely install nut (P) and jam
nut (Q).
•
Insert flared ends of link (E) into slots in front mower
bracket (H).
E
P
F
Q
H
O
M
A
B
IMPORTANT:
CHECK BELT FOR PROPER ROUTING
IN ALL MOWER PULLEY GROOVES.
•
Raise attachment lift lever to highest position.
•
If necessary, adjust gauge wheels before operating
mower as shown in the Operation section of this manual.
See Mower Drive Belt Installation in "TO REPLACE MOWER
BLADE DRIVE BELT" in this section of the manual.
•
Check Front-To-Back Adjustment in "TO LEVEL
MOWER" in this section.
D
C
Fig. 27
E
A
M
Q
F
B
C
C
O
H
D
D
P