Husqvarna Z146 Owner Manual - Page 14
Throttle Control, Choke control, Service Meter, Blade Switch, Avoid idling the engine for long periods
View all Husqvarna Z146 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CONTROLS Throttle Control Service Meter The throttle control regulates the engine speed and thereby the rate of rotation of the blades, assuming the blade switch is pulled out. To increase or decrease the engine speed, the control is moved forward or back respectively. Avoid idling the engine for long periods, as there is a risk of fouling the spark plugs. USE FULL THROTTLE WHEN MOWING, for best mower performance and battery charging. The service meter displays the total operating time with the blade activated. At 50 hour intervals of operation, an oil can icon shows and stays on for two hours before an automatic reset occurs. To manually reset the meter, turn the key off and on five times at one second intervals. To service the engine and mower, see the Service Journal of this manual. Note: The service meter operates (clocks hours) only when the engine is running. Be sure to turn the key off when the unit is not in use, to prevent meter hours from accumulating. Choke control Blade Switch The choke control is used for cold starts to provide the engine with a richer fuel mixture. For cold starts the control should be pulled up. To engage the mower deck, pull the knob out; mower blades are disengaged when the knob is pressed down. 14