IBM 2889 Hardware Maintenance Manual - Page 62
Error, messages
View all IBM 2889 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Symptom-to-FRU index Error messages Symptom or error Device address conflict. Allocation error for device. Failing bits: nnnn. Invalid system configuration data. I/O device IRQ conflict. Operating system not found. Hibernation error. Fan error. Thermal sensing error. Authentication of system services failed. Press to resume. FRU or action, in sequence 1. Load "Setup Defaults" in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. Load "Setup Defaults" in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. DIMM. 2. System board. 1. DIMM. 2. System board. 1. Load "Setup Defaults" in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. Check that the operating system has no failure and is installed correctly. 2. Enter the BIOS Setup Utility and see whether the hard disk drive and the diskette drive are properly identified. 3. Reseat the hard disk drive. 4. Reinstall the operating system. 5. Diskette drive. 6. Hard disk drive. 7. System board. 1. Restore the system configuration to what it was before the computer entered hibernation mode. 2. If memory size has been changed, re-create the hibernation file. Fan. System board. The Predesktop Area in the HDD is corrupted. Restore it from a recovery CD. 58 R50/R50p, R51 Series