IBM 3110X User Guide - Page 12

Supported BladeCenter chassis and expansion cards The Cisco Catalyst Switch Modules 3110G and 3110X are supported in the IBM BladeCenter chassis as listed in Table 4. Table 4. IBM BladeCenter chassis that support the Cisco Catalyst Switch Modules 3110G and 3110X I/O module Part number Cisco Catalyst Switch Module 3110G 41Y8523 N Y† Y Y Y Y N Cisco Catalyst Switch Module 3110X 41Y8522 N Y† Y Y Y Y N † The Advanced Management Module must be installed in the BladeCenter E chassis The Cisco Catalyst Switch Modules 3110G and 3110X support the expansion cards listed in Table 5. Table 5 also lists the chassis bays in which the switch module must be installed when used with each expansion card. The Cisco Catalyst Switch Modules 3110G and 3110X fit in a standard I/O bay (bays 1-4) and, with the addition of the Multi-Switch Interconnect Module (MSIM) in the BladeCenter H, can also fit in a high-speed I/O bay (bays 7-10). These switch modules are not supported with MSIM-HT in high-speed bays of the BladeCenter HT chassis. Table 5. Expansion card and BladeCenter chassis I/O bays support. Description Part Number Gigabit Ethernet integrated on the server planar None Y Y‡ N N N N N N N N Ethernet Expansion Card (CFFv) 39Y9310 Y† Y† Y Y N N N N N N Ethernet Expansion Card (CIOv) 44W4475 NNYYNNNNNN QLogic Ethernet and 4 Gb FC Card (CFFh) 39Y9306 NNNNNNYNYN 2/4 Port Ethernet Expansion Card (CFFh) 44W4479 N Y* N N N N Y Y Y Y QLogic Ethernet and 8 Gb FC Card (CFFh) 44X1940 NNNNNNYNYN ‡ For all BladeCenter chassis except the BladeCenter S † Supported only if the expansion card is installed in slot 1 of a BladeCenter Storage and I/O Expansion Unit (39R7563). * The 2/4 Port Ethernet Expansion Card supports I/O bay 2 connections only when installed into a blade server that is installed into a BladeCenter S chassis. Cisco Catalyst Switch Modules 3110G and 3110X for IBM BladeCenter 12