IBM 412CID Operation Guide - Page 28
Caller Id
UPC - 093016841217
View all IBM 412CID manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
CALLER ID This feature requires Caller ID subscription from the local telephone company. If you have multiple phone lines, you need to subscribe to Caller ID service on each line (defined as each different phone number) in order for Caller ID to display on those lines. CALLER IDENTIFICATION DISPLAYS Caller ID Displayed when the Phone is Idle 1. The phone rings, signaling an outside call. 2. The display shows the caller's name and number and line that the call is coming in on. 3. The display returns to the normal display mode after approximately 5 seconds if the caller hangs up before the call is answered or if the call is picked up by another phone in the system. Caller ID Displayed on the Phone when in Use If a call comes in while a feature requiring the use of the display is being performed (such as programming the SPEED DIAL key, making an outgoing call, setting the clock, etc.), the Caller ID may be displayed by: 1. The phone will ring, indicating an incoming call. 2. To view the Caller ID, press the [CALLID] key. 3. Press the [CALLID] key again to return to your original LCD display. Simultaneous Caller ID Signals (Ringing on Multiple Lines) The Caller ID function will support up to four incoming calls at once. The [CALLID] key is used to scroll through the incoming Caller ID displays. An example of this follows: 1. The phone rings on two lines (for example, first on [LINE 1] and then immediately after on [LINE 3]). 2. The display will show the caller information for the call that came in first [LINE 1]. 3. Press the [CALL ID] key to display information about the caller on the second ringing line [LINE 3]. AREA CODE PROGRAMMING This feature allows calls to be stored as a local call and dialed back as a local call. There is storage for one local area code. Once you program the local area code, all incoming phone calls from that point on will have that local area code deleted automatically. Any phone call received prior to area code programming will be stored with the area code and dialed with the area code until deleted from the Caller ID log. 28