IBM 4247 User Guide - Page 382
IBM 4247 Printer Automatic Sheet Feeder Guide, IBM 4247 Printer Automatic Sheet, Feeder Guide
View all IBM 4247 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 382 highlights
87 STACKER ERROR INSTALL STACKER Recovery: 1. Turn the power Off (O). | 2. Make sure all parts of the automatic sheet feeder are installed correctly. See | the IBM 4247 Printer Automatic Sheet Feeder Guide. 3. Turn the power On (|). 88 INVALID PAPER SOURCE USE MANUAL OR CHANGE CONFIGURATION | Incorrect Power On Paper Source selected in configuration. Change the configuration to an available paper source. Recovery: 1. Press Stop. 2. See the appropriate "configuring the printer" procedure for the desired paper path. For Front Push, see page 17-11. For Rear Push, see page 17-25. For Rear Pull, see page 17-68. For Push-Pull, see page 17-89. For Dual Push-Pull, see page 17-44. | For the Automatic Sheet Feed, see the IBM 4247 Printer Automatic Sheet | Feeder Guide. 89 RIBBON JAM CHECK RIBBON Recovery: 1. Turn the power Off (O). 2. Remove the ribbon cartridge. 3. Turn the ribbon advance knob to be sure that the ribbon is advancing correctly. If the ribbon does not advance correctly, replace the ribbon cartridge. 4. Reinstall the ribbon. (See "Removing the Ribbon Cartridge" on page 19-11 in Chapter 19, "Supplies, Optional Features, and Maintenance.") 5. Turn the power On (|). 6. If the printer displays again, call for service. 20-16 001, 002 User's Guide