IBM 84903bu User Manual - Page 74
determine
UPC - 000435882073
View all IBM 84903bu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Table 2. Abbreviated list of POST error codes (continued) v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the parts listing in the Problem Determination and Service Guide to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 8603 Pointing-device error. 1. Reseat the pointing device. 2. Replace the following components one at a time, in the order shown, restarting the server each time: a. Pointing device b. (Trained service technician only) System board 00012000 Processor machine check error. 1. (Trained service technician only) Reseat the microprocessor. 2. Replace the following components one at a time, in the order shown, restarting the server each time: a. (Trained service technician only) Microprocessor b. (Trained service technician only) System board 00019701 Microprocessor 1 failed the built-in self-test (BIST). 1. (Trained service technician only) Reseat the microprocessor. 2. Replace the following components one at a time, in the order shown, restarting the server each time: a. (Trained service technician only) Microprocessor b. (Trained service technician only) System board 01298001 No update data for microprocessor 1. Update the BIOS code again 1. (see the Problem Determination and Service Guide on the IBM xSeries Documentation CD). 2. (Trained service technician only) Reseat the microprocessor. 3. (Trained service technician only) Replace the microprocessor. 60 xSeries 206m Types 8485 and 8490: Installation Guide