IBM A40p Hardware Maintenance Manual - Page 63
Beep symptoms, Beeps, Description, FRU/Action, Run Setup, System Board, Memory Module, Keyboard
View all IBM A40p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Beep symptoms Beep symptoms are short tones or a series of short tones separated by pauses (intervals without sound). See the following examples. Beeps 1-2-X 4 Description v One beep v A pause (or break) v Two beeps v A pause (or break) v Any number of breaks Four continuous beeps Use the following table to diagnose beep symptoms. Beep Symptom 1-1-3 CMOS read-write error 1-1-4 ROM BIOS check error 1-2-X DMA error 1-3-X 1-4-4 1-4-X Error detected in first 64 KB of RAM 2-1-1, 2-1-2 2-1-X First 64 KB of RAM failed 2-2-2 2-2-X First 64 KB of RAM failed 2-3-X 2-4-X 3-1-X DMA register failed 3-2-4 Keyboard controller failed FRU/Action 1. Run Setup 2. System Board 1. System Board 1. System Board 1. Memory Module 2. System Board 1. Keyboard 2. System Board 1. Memory Module 2. System Board 1. Run Setup 2. System Board 1. Memory Module 2. System Board 1. Video Adapter (if installed) 2. System Board 1. Memory Module 2. System Board 1. Memory Module 2. System Board 1. Run Setup 2. Memory Module 3. System Board 1. System Board 1. System Board 2. Keyboard Chapter 6. Symptom-to-FRU Index 57