IBM NB1003 Hardware Maintenance Manual - Page 65
interactive
UPC - 890552502493
View all IBM NB1003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Symptom-to-FRU index Symptom or error FRU or action, in sequence 0185 Bad startup sequence settings. Enter BIOS Setup and load Setup defaults. 1. Run BIOS Setup Utility. Press F9, and Enter to load the default setting. Then save the current setting by pressing F10. 0187 EAIA data access error-The access to EEPROM is failed. System board. 0188 Invalid RFID Serialization Information Area. System board. 0189 Invalid RFID configuration information area-The EEPROM checksum is not correct. System board. 0190 Critical low-battery error 1. Charge the battery pack. 2. Battery pack. 0191 System Security-Invalid Remote Change requested. 1. Run BIOS Setup Utility, and then save current setting by pressing F10. 2. System board. 0192 System Security- IBM Embedded Security hardware tamper detected. System board. 0199 1. Run BIOS Setup Utility, System Security-IBM Security password retry count exceeded. and then save the current setting by pressing F10. 2. System board. 01C8 Two or more modem devices are found. Remove all but one of them. Press to continue. 1. Remove either a Mini-PCI Card or a modem daughter card. Otherwise, press Esc to ignore the warning message. 2. System board. 01C9 1. Remove the Ethernet More than one Ethernet devices are found. Remove one of them. Press to continue. device that you installed; or press Esc to ignore the warning message. 2. System board. 0200 Hard disk error-The hard disk is not working. 1. Reseat the hard disk drive. 2. Load Setup Defaults in BIOS Setup Utility. 3. Hard disk drive. 4. System board. 021x Keyboard error. Run interactive tests of the keyboard and the auxiliary input device. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 59