IBM x3105 Service Guide - Page 111
Configuration, information, instructions - eserver drivers
UPC - 000435950734
View all IBM x3105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Chapter 5. Configuration information and instructions This chapter provides information about updating the firmware and using the configuration utilities. Updating the firmware The firmware in the server is periodically updated and is available for download on the Web. Go to http://www.ibm.com/servers/eserver/support/xseries/index.html to check for the latest level of firmware, such as BIOS code, vital product data (VPD) code, device drivers, and service processor firmware. When you replace a device in the server, you might have to either update the server with the latest version of the firmware that is stored in memory on the device or restore the pre-existing firmware from a diskette or CD image. v BIOS code is stored in read-only memory (ROM) on the system board. v Ethernet firmware is stored in ROM on the Ethernet controller on the system board. v Major components contain VPD code. You can select to update the VPD code during the BIOS code update procedure. Configuring the server The ServerGuide Setup and Installation CD provides software setup tools and installation tools that are specifically designed for your IBM server. Use this CD during the initial installation of your server to configure basic hardware features and to simplify your operating-system installation. (See "Using the ServerGuide Setup and Installation CD" for more information.) In addition to the ServerGuide Setup and Installation CD, you can use the following configuration programs to customize the server hardware: v Configuration/Setup Utility program v Boot Menu program v Broadcom NetXtreme Gigabit Ethernet Boot Agent v Ethernet controller configuration For more information about these programs, see "Configuring the server" in the User's Guide on the IBM System x Documentation CD. Using the ServerGuide Setup and Installation CD The ServerGuide Setup and Installation CD provides programs to detect the server model and optional hardware devices that are installed, configure the server hardware, provide device drivers, and help you install the operating system. For information about the supported operating-system versions, see the label on the CD. If the ServerGuide Setup and Installation CD did not come with the server, you can download the latest version from http://www.ibm.com/pc/qtechinfo/MIGR4ZKPPT.html. © Copyright IBM Corp. 2007 93