IC Realtime ELIP-ID1 Product Manual - Page 1

ELIP-ID1 IDENTIFIER SERIES LICENSE PLATE RECOGNITION IP 2MP CAMERA Main Features  1/2.8" 2.13M Sony Exmor & Starvis CMOS Sensor  2-Motor f=5~50mm M/P Lens (Semi Auto-focus Lens)  5 x 850nM SR-LEDs & 25 x 850nM IR LEDs [B/W Images]  Max. 15M Recognition Distance (Max. 50Km/h)  B/W Images for both Day & Night  POE Interface Built-in  Onvif Ver. 2.4 Compatible with H.264 and MJPEG Dimension Specifications Model Signal System Pickup Device Scanning System Total Pixels Active Pixels Min. Illumination No. of IRED S/N Ratio Video Out (RJ45) Lens Lens (Mount) Angle of View OSD Camera Title Language Exposure White Balance HLC Day & Night Mode Gain Control Electronic Shutter Noise Reduction DSS(Sens-up) Mirror Other Features Network Protocol At-a-time Access Video/Audio Codec Sensor In/Alarm Out Audio Line In/Out Power Source Power Consumption Operating Temp. Size (mm) Weight ELIP-ID1 IP (Network) - Embedded Linux 1/2.8"(D-6.4mm) 2.13M SONY Exmor/Starvis CMOS Progressive Scan (16:9) 2.16M [1945(H)x1109(V)] 2.13M [1945(H)x1097(V)] 0Lux(Continuous IR on) 5ea SR-LED and 25ea 5Ø (850nM) More than 50dB (AGC off) Up to 30fps @ 1920x1080p (1920x1080, 1280x1024, 1280x960, 1280x720, 1024x768, 640x480, 320x240) 2-Motor Semi Auto-Focus Vari-focal f=5~50mm, F1.4 Board type (Ø14) 58.7˚~8.7˚(D), 51.4˚~7.6˚(H), 29˚~4.3˚(V) Via Webpage Viewer Off, On(Max. 10 Characters) English, Korean DC Auto, Push, Indoor, Outdoor, Fluorescent, User Off B/W for Day & Night AGC (0.1dB~8dB) 1/500sec Off, On (2D-NR, 3D-NR) N/A Off, On(Mirror, Flip, Rotate) Motion Detection (4 Zones), Privacy Mask (8 Zones), Defog, Lens Shading Compensation etc. TCP/IP, UDP/IP, RTP, RTSP, RTCP, NTP, HTTP, DHCP, FTP, SMTP, DNS, DDNS, Onvif 2.4 Maximum 10 users H.264, MJPEG / G.711 (Triplex Streaming) Streaming RTP/RTSP supported Option (1 / 1) Option (1 / 1, Two-way Audio) DC12V / POE Built-in Less than 9Watts (750mA) -10℃ ∼55℃ (Humidity :0%RH ∼ 90%RH) 70Ø (Bullet Diameter) 1,262 g (gift-box packing)