IC Realtime ELIP-ID1 Product Manual - Page 3
admin / admin.
View all IC Realtime ELIP-ID1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
ELIP-ID1 IDENTIFIER SERIES LICENSE PLATE RECOGNITION IP 2MP CAMERA • IP camera connection Connect LAN cable to RJ45 jack of camera Connect the other end LAN cable to RJ45 jack of router or hub If you are not using POE switcher to provide the power to the IP camera, connect regulated a DC12V power adaptor to the IP camera. Wait for about 50 seconds until the camera initialization is completed Factory IP mode is DHCP Factory Default ID & Password are admin / admin. • Using IP manager You can simply change the IP address by using 'IP Manager' provided. Run IP manager as administrator. click "Find" button when the IP camera is connected to your PC or network, all IP address will appear. Choose & change the IP address of camera you want to change and click "change" Button After click the "change" button left window will be appeared. Once you click "change" button, the camera will reboot for 10second. After reboot the camera, the changed IP address will be applied and appeared. • Checking Video by Web Viewer Run web browser and Input the IP address which taken from IP manager. • Supported O/S & Web Browser - O/S : Windows7, 8, 10, MAC - Browser : Internet Explorer 11 or higher, Firefox, Safari, Opera * Monitoring videos can be operative only under IE with Active-X installation.