IC Realtime HDVR-MX1616-1U4K-AI1-WEB Product Manual - Page 300

5.19.3 Configuring System Maintenance Settings When the Device has been running for a long time, you can configure the auto reboot when the Device is not working. You can also configure the case fan mode to reduce noise and extend the service life. Step 1 Select Main Menu > SYSTEM > SYSTEM MAINTAIN. The SYSTEM MAINTAIN interface is displayed. See Figure 5-284. Figure 5-284 Step 2 Configure the settings for the system maintenance parameters. See Table 5-79. Parameter Description Auto Reboot In the Auto Reboot list, select the reboot time. Case Fan Mode In the Case Fan Mode list, you can select Always run or Auto. If you select Auto, the case fan will stop or start according to the external conditions such as the Device temperature. Not all models support this function, and it is only supported on the local configuration interface. Table 5-79 Step 3 Click Apply to complete the settings. 5.19.4 Exporting and Importing System Settings You can export or import the Device system settings if there are several Devices that require the same setup. Local Configurations 291