IC Realtime HDVR-MX1616-1U4K-AI1-WEB Product Manual - Page 57

Figure 5-24 Step 2 Configure the record settings parameters. See Table 5-9. Parameter Description Channel In the Channel list, select a channel to record the video. Pre-record In the Pre-record list, enter the amount of time that you want to start the recording in advance. If there are several HDDs installed to the Device, you can set one of the HDDs as the redundant HDD to save the recorded files into different HDDs. In case one of the HDDs is damaged, you can find the backup in the other HDD.  Select Main Menu > STORAGE > HDD MANAGER, and then set a HDD as redundant HDD. Redundancy  Select Main Menu > STORAGE > SCHEDUE > Record, and then select the Redundancy check box.  If the selected channel is not recording, the redundancy function takes effect next time you record no matter you select the check box or not.  If the selected channel is recording, the current recorded files will be packed, and then start recording according to the new schedule. Event type  Not all models support this function.  The redundant HDD only back up the recorded videos but not snapshots. Select the check box of the event type which includes General, MD (motion detect, video loss, tempering, diagnosis), Alarm (IoT alarms, local alarms, alarms from alarm box, IPC external alarms, IPC Offline alarms), MD&Alarm, Intel (IVS events, face detection), and POS. Local Configurations 48