IC Realtime ICIP-D4001IR-I Product Manual - Page 8
The working current of alarm output port is recommended as <= 10mA. The max current which is used
 |
View all IC Realtime ICIP-D4001IR-I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Figure 1-4 Please refer to the following figure for alarm output information. See Figure 1-5 When alarm output is OC, it needs to increase pull-up resistance externally to work normally; output signal is high and low level. After external pull-up resistance is increased, the default of output signal is high level, and it switches to low level when there is alarm output. The working current of alarm output port is recommended as
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
 |
 |
3
Figure 1-4
Please refer to the following figure for alarm output information. See Figure 1-5
When alarm output is OC, it needs to increase pull-up resistance externally to work normally; output
signal is high and low level. After external pull-up resistance is increased, the default of output signal is
high level, and it switches to low level when there is alarm output.
The working current of alarm output port is recommended as <= 10mA. The max current which is used
to drive external circuit is 80mA, it is advised to add a relay if it is beyond the value.
Figure 1-5