IC Realtime ICM-7100-WEB Product Manual - Page 22

Figure 2- 20  CMS: This function is mainly for registration of CMS device mount on N+M back. Auto register device: need to fill in server IP and CMS port (by default ARS server port is 9500), if you directly write server IP, then when the server goes down, redundant server will replace, and the Auto register device cannot register to redundant server. To prevent this situation, when you register it, fill in hot spare VIP for server IP, and fill in port as port of CMS (9500 by default). By auto registering Auto register device, when server has redundant server replacement, it can be used as normal. Note: This function requires specific device (please refer to the device).  DMS Set Reset listening port, it is 80 be default.  SS Max locked record ratio: record lock function, currently only support to lock center record; after record is locked at client, when storage disk is full and overwrites, it skip locked record and overwrite non-locked record. Default ratio is 10, and user can customize size of lock record.  PES Control pos end string, end string is "Thank you!" by default.  ARS: Auto register server IP is server port, which is 9500 by default. It can be modified as long as identical with registration on device. Stream type: self-adaptive, main stream and sub stream. Self-adaptive: when access client, according to client setup, stream self adapts to change. Main stream: when access client, do not affect by client setup, stream type shows main stream. Sub stream: when access client, do not affect by client setup, stream type shows sub stream. Currently stream type setup is valid for static connection auto registration device (device auto register type, please refer to device).  PCPS This option is for non-ICRealtime device connection. Please maintain default setup.  SOSO server 12