IC Realtime ICM-7100-WEB Product Manual - Page 67

Parameter Step Length Zoom Focus Iris Preset Tour Aux Note Partial zoom for zoom in/out of certain area. Note: This function can only be controller with mouse. It controls rotation speed of PTZ in 1~ 8 directions with different step lengths. It controls zoom of speed dome. It adjusts focus. It adjusts brightness. Via setting preset, you can rotate camera toward position of the preset. Via setting tour, you can tour camera among different presets. Note: This function does not require support from speed dome, but speed dome must support preset. It adjusts light, wiper, PTZ menu, auto rotation, aux 1, aux 2 and IR light.  Preset By setting preset, you can rotate camera toward position of preset. To add preset: Step 1. Click direction key on PTZ to rotate camera. Step 2. Click Preset tab. Step 3. Click Add. System pops up Preset Setup interface. Step 4. Input SN and Name as in Figure 5-20. Figure 5-20 Step 5. Click OK. When you need to rotate the camera toward designated position, you just need to select direction from the dropdown list, and click Go.  Tour Via set Tour, you can make camera tour among different presets. Note: There must be at least two presets for tour. 57