IC Realtime NVR-708NS Product Manual - Page 123
Detect
View all IC Realtime NVR-708NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Parameter Function Type There are two options: normal open and normal close. NO becomes activated in low voltage, NC becomes activated in high voltage. Period Alarm record function becomes activated in the specified periods. There are six periods in one day. Please draw a circle to enable corresponding period. Select date. If you do not select, current setup applies to today only. You can select all week column to apply to the whole week. Click OK button, system goes back to alarm setup interface, please click save button to exit. Anti-dither System only memorizes one event during the anti-dither period. The value ranges from 0 to 15s. Relay Out Enable alarm activation function. You need to select alarm output port so that system can activate corresponding alarm device when alarm occurs. For 6-ch alarm output port device, the 6th channel is the controllable +12V output. Alarm Latch System can delay the alarm output for specified time after alarm ende The value ranges from 10 seconds to 300 seconds. Record Channel Record Latch System auto activates current channel to record once alarm occurs (working with alarm activation function). Please note current device shall be in auto record mode System can delay the record for specified time after alarm ended. T value ranges from 10s to 300s. Email Please draw a circle to enable email function. System can send o email to alert you when alarm occurs and ends. Screen display Buzzer After enabled, alarm info will be prompted out on the local output end. That is to say, the alarm prompt will be displayed beside the channel name on the local surveillance image. Once you check the box here, the buzzer beeps when an alarm occurred. Tour Display the selected video in local monitor window. When alarm occurs, system can begin one-window tour for the activated record channel. Please set the tour time in the local end. PTZ activation Here you can set PTZ movement when alarm occurs. Such as go to preset x when there is an alarm. The PTZ configuration events include preset, tour, and pattern. Capture Copy You need to input capture channel number so that system can backup snapshot file when alarm occurs. It is a shortcut menu button. You can copy current channel setup to one or more (all) channels. 8.4.2.1 Detect By analyzing video image, system will boot video detection alarm when it senses the motion 114