IC Realtime NVR-708NS Product Manual - Page 24
eSATA, eSATA port
![]() |
View all IC Realtime NVR-708NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
1-3 NO C A B Power button PoE PORTS MIC IN MIC OUT eSATA Port Name Alarm input port 1-3. Alarm input port ground end Connection I/O port Function z Alarm input port. z When your alarm input device is using external power, please make sure the device and the NVS have the same ground. Alarm input ground end. Alarm output port z 3 groups of alarm output ports. (Group 1: port NO1~C1,Group 2:port NO2~ C2,Group 3:port NO3~C3)).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device. z NO:Normal open alarm output port. z C:Alarm output public end. RS485 port RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. Power input port Input 12V DC. Power on/off button. Built-in Switch supports PoE function. Power input port Switch power port. Input DC 48V. Audio input port Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as mike phone, pickup. Audio output port eSATA port Audio output port. It is to output the analog audio signal to the devices such as the sound box. External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. 2.2.3 NVR7XXN Series The rear panel is shown as below. See Figure 2-6. 15
![](/manual_guide/products/ic-realtime-nvr604v-product-manual-416a863/24.png)